Manufacture supply Long Neck Venturi Gas/Liquid Two-Phase Flowmeter
The long-neck Venturi gas/liquid two-phase flowmeter is optimized and designed with a long-neck Venturi tube as its throttling element based on theoretical analysis and CFD numerical simulation techniques for computational fluid dynamics.
The original double-differential pressure ratio method holdup measurement technology is applied, which is applicable to the measurement of gas/liquid two-phase flow at gas wellhead with a medium~low liquid content.
Product features Patented technology: original double-differential pressure ratio method holdup measurement technology. Long-neck venturi gas / liquid two-phase flowmeter Unseparated metering: gas wellhead gas/liquid two-phase mixed transmission flow measurement, without separator required. No radioactivity: no gamma-ray source, safe and environment friendly. Wide application range: applicable to conventional gas fields, shale gas fields, tight sandstone gas fields, coalbed methane fields, etc.
Model |
HHTPF-LV |
Gas phase measurement accuracy
|
±5%
|
Accuracy of liquid phase measurement
|
±10%
|
Liquid rate flow range
|
0~10%
|
Nominal diameter
|
DN50, DN80
|
Design pressure
|
6.3MPa, 10MPa, 16MPa
|
Material
|
304, 316L, Hard alloy, nickel-base alloy,2205
|
UNIQUE FEATURES OF ANDISOON MASS FLOWMETER
Mass flow meters are known for their high accuracy, wide measuring range and reliable performance, and have been successfully used in various industries over the past many years.
Unlike other instruments that are limited to measuring liquids at normal pressure and temperature, ANDISOON excels in measuring under challenging conditions, including high pressure, high viscosity, and high and low temperatures. For example, when measuring CNG (compressed natural gas), the difficulty lies in the high pressure.
However, ANDISOON's sensors can withstand high pressures, allowing the necessary increase in flow tube thickness, allowing the transmitter to detect signals with greater sensitivity. Therefore, ANDISOON's mass flow meters specially designed for CNG gas dispensers have been widely used in the market.
In the field of cryogenics, Andisoon has developed a backflow meter and a liquid phase injection meter for LNG refueling stations, with a minimum temperature of -196°C.
In the field of process control, Andisoon has developed a micro-bend type mass flowmeter, with a maximum flow rate of up to 300t/h, widely used in petroleum, chemical and other industrial conditions.
A. ANDISOON mass flowmeter directly measures the mass flow rate, it is measured in terms of standard volume alone. Bits provide output without the need to compensate for variable pressure or temperature in the flow computer.
In addition, because ANDISOON flowmeters have no wearable moving parts and calibration will not change over time,
changes, so they require no routine maintenance.
B. ANDISOON R& D team is Using hardware DSP data processing technology
Our company adopts the world's most advanced second-generation transmitter technology - DSP processing technology, which has higher measurement accuracy, wider range, simpler structure and more stable operation.
C. Can measure high pressure gas
The application of domestic mass flow meters is mainly concentrated in the field of liquid measurement, and there is no mature application in the field of gas measurement. On the basis of mastering DSP processing technology, our company complies with the needs of the industry and designs a high-precision mass flow meter suitable for high-pressure gas measurement, which is more suitable for the needs of the high-pressure gas measurement industry and has better performance.
D. Industry-leading high-pressure aging process
The high-pressure aging platform built by our company conducts aging tests on each CNG flow meter, providing an effective solution to the problem of measurement performance degradation that may be caused by changes in sensor characteristics due to long-term high pressure during later use.
E. Good zero point stability
Our company has designed a set of high-precision processing technology for the manufacturing of sensors to ensure the quality of the sensor, and its zero-point stability is not inferior to imported products.
F. Multi-parameter measurement technology
Our company adopts digital signal processing (DSP) technology. Compared with analog technology, front-end digital processing equipment significantly reduces signal noise and responds faster. It adopts 485 communication. The host side of the metering system can obtain the required relevant parameters through 485 communication. , such as: mass flow, volume flow, temperature, density, status and other information. For liquid applications, mass flow meters using multi-parameter measurement technology can achieve an accuracy of 0.2. The actual accuracy can be higher and the performance can be even better.
G. Self-diagnosis technology
In the actual application process, when an abnormality occurs in the flow meter, the fault code can be read through debugging software or handheld debugging equipment, which facilitates flow meter users to solve the problem more comprehensively and eliminate faults.
H. Supports standard industrial control communication protocols ModbusRTU, etc., making it easy to configure and use.
I. Industry-leading cryogenic calibration platform
In the process of LNG development, the company has built an industry-leading cryogenic calibration platform, using liquid nitrogen (-196°C) with a lower temperature than LNG as the calibration medium, providing a cryogenic solution for the development of LNG Coriolis flowmeters. Application experience. This calibration platform has now been used as the calibration platform for all the company's LNG flow meters, enabling real cryogenic calibration of each LNG flow meter to ensure the measurement accuracy of cryogenic applications.
J. Good scalability
The company can design and manufacture mass flow meters with special specifications and models and special functions according to user needs, tailor-made for users.
a. (Left picture)The optimal vibration mode of flowmeters is determined after the finitement analysis, the structure is improved and the modal in each order is reasonably distributed. Driven by the simple harmonic, each position of the measuring tube will respond. A reasonable damped structure has been designed to improve the noise-proof feature.
b. (Right picture)The high-performance 32/40-bit DSPs are used as the core processor, including high efficiency instruction set, hardware FFT and
other peripherals specially used for audio signal processing to fast process various digital signals in real time and largely improve the stability of flowmeters.
c. The mass flowmeter is welded by the unique vacuum brass solder process, which ensures the welding quality and also fully guarantees the stress removal to largely improve the zero stability of mass flowmeter in use.
d. Water gauge calibration testing platform: The Company owns the scarce calibration systems and stability testing system for water gauges with large-span diameter (DN6-DN400) in the industry for the operating condition calibration and the stability testing of flowmeters.
e. High pressure gas testing platform: The Company has established the first high pressure air (25MPa) calibration system and stability testing system in China for the operating condition calibration and the stability testing of high-pressure flowmeters.
f. Liquid nitrogen low-temperature calibration testing platform: The Company has established the first copious cooling calibration system and stability testing system in China for the operating condition calibration and the stability testing of low-temperature flowmeters.
Chengdu Andisoon Measure Co., Ltd is a leading instrument-making manufacturer in China, renowned for its patents, copyrights, and industry-standard certifications. With over 110 patents, Andisoon has independently developed high-quality flowmeters and a wide range of precision measurement products, including flowmeters , Nozzles & Valves, Cryogenic Pumps, Liquid Hydrogen products, Calibration Devices, Automatic Meters, and System Integration. Andisoon's flowmeters are utilized across various industries, including oil, refining, chemical, shipbuilding, pharmaceuticals, food & beverage, and environmental protection. They excel in challenging environments, such as high pressure, viscosity, and temperature variations, with sensors designed to withstand high pressures, enabling greater sensitivity in signal detection. The company offers high-precision metering solutions, with product sizes ranging from DN3 to DN150, and provides ODM, OEM, and direct sales services for overseas customers. Andisoon possesses rare calibration systems and stability testing for water gauges, including large-span diameter (DN6-DN400) and high-pressure air (25MPa) calibration and stability testing systems, as well as extensive cooling calibration systems for low-temperature flowmeters.
Q1:Are you a trading company or a manufacturer?
A: We are a professional manufacturer with our own factory.
Q2: Do you accept OEM?
A2: Yes
Q3:What is the warranty period?
A3:The quality guarantee period is 12 months from the completion of installation and commissioning by the purchaser, or 14 months from the date of delivery (whichever comes first), excluding maintenance kits or small accessories.
Q4:What is the delivery date?
Andisoon: Our stock is based on GB/DIN flange, with a delivery date of 10 days. We also accommodate other flanges like ANSI/JIS or thread connection, with a delivery date of 15 days.